These Electromagnetic Clutches require running in to obtain the rated torque values. To run the unit in you should engage and disengage the clutch several times at high speed but with the hydraulic system unloaded.

When fitting the clutch please clean the pulley carefully to ensure that no oil or grease is left on the pulley.

When fitting cluches with front driving flange check for correct coupling alignment.

Do not exceed the maximum rated torque as this would cause the clutch to slip if this last for more than 5 seconds the coils would burn out.

Model	30930-P-24
Max Torque daNm	14
Max Speed RPM	3000
Mounting Flange For	Group 1 or 2 pump
Voltage V	24 V DC
Pulley Diameter mm	153
Spline Adaptor to suit	10044 for group 2 pump with 4mm key 10010 Group 1 pump with 2.4mm key
Output Spline	35x31 DIN 5482 (Z.18) 18 tooth