Hydraulic Mobile Lever Valves MB25
MB25 series of 1 to 6 bank monoblock hydraulic mobile lever valves, are designed for a maximum flow rate of 45 litres per minute with a maximum pressure of 250 bar on P, A and B, 40 on the tank port.
The lever pivots are fully sealedand the internal mechanism is greased for further protection against corrosion.
The spools are hard chromium plated to resist corrosion and wear.
The valves are suitable for use with mineral oil in the temperature range 0-80° C.
MB60 valves can be supplied in a wide range of configurations.
Close centre spools
3 position spring return
2 or 3 position detent
4 position spools with regenerative position.
Relief valves on A and B ports
Cross line reliefs on A and B ports
Pilot operated check valves on A and B ports
A wide range of centre configurations
We are also stock high pressure carry over plugs so that another valve can be connected as well as closed centre plugs if pressure to tank in the centre position is not required.
We are constantly adding products to this webshop. This is only a small selection of the products that we have available. If you don't see what you are looking for please do not hesitate to contact our experienced technical sales team on 01733 234800 or email us from the contact page on this website.