1 1/4"BSP Suction Strainer 90L/Min 0.3Bar By-pass
Part no. AS 060-91S
In the suction line of pumps of hydraulic or lubricating circuits.
Protection against malfunction:
By full-flow filtration in the suction line, particularly the pumps are protected from coarse dirt particles that have remained in the system after manufacture or repair, or enter the system when it is filled with oil.
The robust construction with end caps, inner core and mesh screen material, all out of metal, offfers the following advantages:
› maximum reliability at increased operating temperatures
› enormous shock and vibration resistance
Flow direction from outside to centre.
The star-shaped pleating of the filter material results in:
› large filter surfaces
› low pressure drop
› long service life
› Cleaning in ultrasonic bath for a few minutes. As an alternative, put suction filter in cleaning agent for approx. 15 minutes and remove dirt from the outside using a brush.
› Then flush with fresh cleaning fluid from the inside to the outside. › Blow out with compressed air from the inside to the outside. In any case, be careful that no dirt enters the inner side (clean oil side) of the suction filter