Flow Divider 1/2"
2 Way Flow dividers allow the division of inlet flow into two equal parts (50/50) and they combine in the reverse direction. independent of changes in pressure and flow. These valves are used when two equally sized actuators That arenot mechanically coupled supplied by the same pump and controlled by a single valve must move simultaneously.
Body: Cast Iron/Steel.
Internal Parts: hardened and ground steel
Seals BUNA N
Connect theinput flow to P A and B Ports to the actuators.
|Two Way Flow Dividers Cast Iron|
|Minimum Flow L/M||25|
|Maximum Flow L/M||40|
|Working Pressure Bar||250|
|Peak Pressure Bar||300|